Setting Up Test Instruments

TST PASS is an automated testing system based on a local area network (LAN). Its physical connection to all devices is through Ethernet ports. After connecting all test instruments and the server to the same LAN (connected to the same router's LAN port), you can set the IP addresses of each instrument in the software to complete the test instrument configuration.

The specific steps are as follows:

Step 1: Enter the System Settings Page

Step 2: Enter the IP Addresses of the Instruments Being Used

After entering the IP addresses of each instrument, click the Update&Check button. The system will automatically detect whether the connection with the test instruments is normal.

How to view the IP address of each instrument? View Instrument IP Address