Tools
The Tools section mainly includes the following pages:
Switch Box
Manually switch the RF path of the RF switch.
Screenshot
Manually capture the interface of the Base Station or Spectrum Analyzer.
Power Sensor
Calibration tool for the built-in 4x4 MIMO power probe, used for the annual periodic calibration of the probe.
Frequency Extender
Manually calibrate the vector signal generator frequency extender. For details, refer to External Calibration.
CMW500 Up/Down Converter
Manually calibrate the CMW500 up/down converter. For details, refer to External Calibration.
Import Plan
The original plan data exported from the Plan interface can be re-imported here.