Pass System Automatic Fixed Frequency Test

---

Step 1: Open the EUT Auto option in the Pass system settings.

Step 2: After connecting the hardware devices, set the corresponding EUT Auto IP.

Step 3: After connecting the hardware devices, open the corresponding automatic fixed frequency script (taking Esp32 as an example).

1. Select the correct IP address in the highlighted area.
2. First, click the refresh icon to display the serial ports, and then select the corresponding serial port.
3. Set the corresponding Baud rate and Power Setting according to your needs.
4. Click the start button to begin automatic fixed frequency setting.

You can then proceed with normal testing without any pop-up prompts for fixed frequency setting.